See below for a DIY option.

The standard VSS uses a bracket designed for VW Bus, Vanagon, Bug* and other VW's. You can see a video here: https://youtu.be/JEtdtq4hWqk Just bolt up to the clutch cable stay, align with CV axle bolts (using the built-in LED as a pickup reference), and you're off and running.

VSS Install Instructions: Vehicle Speed Sensor Installation Comes with sensor and bracket. The bracket ships unpainted. Not used for speedometer purposes  

*Bug/T1 VSS brackets need to be slightly bent to angle toward the CV bolt heads.

The Off-road/Swingaxle Transaxle version (eVSS) simulates a vehicle speed for applications where a Standard VSS is difficult to mount (Swingaxle Trans) or sensitive to mud and grime (sandrail, etc). It mounts near the computer and happily simulates a vehicle speed. eVSS Install Instructions: Vehicle Speed Sensor Installation
CONTACT FOR AN INTERNATIONAL SHIPPING QUOTE - busaru@busaru.com

Have a Return?

DIY OPTIONS
Standard VSS: sensor P/N LJ12A3-4-Z/BX, Van/Type 1 bracket: 2.5”x1.375”, Bus bracket 2.5”x0.5”

eVSS: Arduino Pro Mini ATMEGA328P 5V, you can load this sketch to the Arduino:

void setup() { 
}
 
void loop() {
tone(10, random(32,64));
delay(60000);
}
 
ChatGPT has an improved version but I’m testing to make sure it’s suitable, stay tuned.
$30.00
* VSS Type: